Six mathematical optimization engines

Each one solves a load problem. Together, they produce the complete plan.

Use one, some or all: directly, by analysts, or inside the Planning Tower, triggered by AI Agents. The math is the same; the rules are your operation's.

Talk to a specialist
Semi-trailer with the load planned in 3D, split by delivery order
01

3D Load Planning

Builds the load piece by piece in the vehicle's space, in seconds, with the plan in 3D for whoever loads.

+35%
occupancy
−82%
damage
5 s
per plan
  • Automatic buildingEach item positioned in the vehicle's space, in seconds, respecting the operation's rules.
  • Manual 3D editorThe planner drags and drops items in the 3D plan to adjust whatever they want.
  • Scenario simulationCompare vehicles, rules and load combinations before deciding.
  • 3D plan sharingA secure external link opens the 3D plan for whoever loads or receives, with no login.
  • Stacking and fragilityOrientation, maximum stacking and fragile items always in the right place.
  • Delivery orderThe load built in the sequence of stops, to unload without rearranging.
  • StabilityCenter of gravity calculated and a load with no risk of tipping.
Map of a region with pickup plants, delivery cities and trucks on the highways
02

3D Routing

Defines routes and vehicles together with the load, so that the delivery sequence and the cargo space close at the same time.

−19%
km driven
+15%
deliveries per vehicle
−15%
freight cost
  • Route and load in the same calculationThe delivery sequence and the vehicle's space decided together.
  • Multiple pickups and deliveriesPickups and deliveries on the same route, when it makes sense for the operation.
  • Milk run and several plantsPickups at suppliers and distribution from more than one origin.
  • Windows and restrictionsEach customer's delivery window and vehicles allowed per route.
  • Long distanceRoutes between cities and states, not only urban deliveries.
Tractor with a three-axle spread semi-trailer carrying three steel coils
03

Axle Weight Control

Distributes weight within each axle's limit, before loading, for any vehicle configuration.

−99%
fines
100%
of loads within the configured limit
  • More than 30 vehicle modelsDifferent axle configurations and numbers, already registered.
  • Each country's lawAxle limits adjusted to the legislation where the vehicle runs.
  • Heavy, concentrated cargoCoils, steel plates, crates and heavy pallets.
  • CoilsSpacing between coils, coil cradle and position of each coil are configurable.
  • Weight preferenceMore weight on the drive axle or rear axles, according to the operation's rule.
Pallet built with boxes of different sizes, dense and stable
04

3D Palletizing

Builds stable, dense pallets, box by box, with patterns the operator can repeat.

+21%
density
−25%
pallets per load
  • Dense, stable palletsHeavy items at the bottom and nothing overhanging the pallet.
  • Product mixDifferent products on the same pallet, when the rule allows.
  • End customer rulesHeight, weight and build according to the receiver.
  • Repeatable patternsBuilds the operator understands and repeats at the dock.
Warehouse with three rows of racks and aisles, a pallet being built and the semi-trailer open
05

Picking Sequencing

Orders picking by pallet and load build order: what goes in first is ready first.

−34%
loading time
Zero
rework at shipping
  • Sequence by stock positionPicking ordered by the position of each product in the warehouse.
  • Together with palletizingThe pickup order follows the pallet build order.
  • WMS integrationStock positions updated by the warehouse system.
  • Picking listReady for the operator, in the right order.
Yard with ten loaded trucks and three empty spaces
06

CO₂ Emissions

Calculates the emissions of each plan and shows how much higher occupancy and shorter routes avoid. The cleanest truck is the one that doesn't run.

−18%
CO₂
−23%
vehicles for the same cargo
  • Emissions in every planThe CO₂ calculated for each load and each route.
  • Fewer trucks and kilometersThe reduction comes from the same cargo in fewer vehicles and fewer kilometers.
  • No fleet changeNo new engine or fuel to reduce emissions.
  • In the indicatorsCO₂ and kilometers driven in the management dashboards.

Reference results from studies with customer data. Not a guarantee.

The same engine, in any mode.

The examples talk about trucks, but the math plans any cargo space.

  • Roadtrucks and semi-trailers
  • Sea20', 40' and HC containers
  • Railrail cars and intermodal
  • AirULDs and air pallets
  • Swap bodiesswap bodies

Let's move cargo at full capacity, together.

Tell us about your operation. A specialist shows, with your data, how much more fits in each truck and how much of planning can be automated.

Emailjettacargo@jettacargo3d.com
HeadquartersFlorianópolis, Santa Catarina
Track record10 years in the load planning market